Blade mSR - BNF

Fun. Fast. Agil. The Blade mSR has it all

The Blade mSR is the next step in ultra-micro helis for coaxial pilots.
The Blade mSR is a single rotor, ultra-micro helicopter weighing in at less than one ounce ready to fly. Completely factory assembled and flight tested you can be in the air with this agile heli in the time it takes to charge the first battery.

And once that flight is over because the included charger can handle four batteries, and the heli is supplied with two, you can just carry on flying!

The Blade mSR is designed from the ground up and building on the earlier success of the Blade mCX and mCX S300, this great little heli really takes the ultra-micro concept to the next level. With a compact 180mm rotor span, the Blade mSR provides pilots with an awesome level of performance and excitement with its increased agility and speed over co-axial micros.
A unique rotor head design provides the same inherent stability of traditional co-axial (twin-rotor) helicopters, but thanks to a fixed-pitch bell-hiller design the Blade mSR can deliver a much more responsive and spirited performance. The kind of performance that would normally only be associated with larger single-rotor models.
The ready-to-fly version of the Blade mSR comes 100% factory-assembled, flight-tested and ready to fly right out of the box with no assembly or additional setup required. Included in the box is the Blade mSR helicopter, two Li-Po flight batteries, convenient 4-port battery-powered DC Li-Po charger, 6V, 1.5 Amp AC/DC power supply.

The Blade mSR comes complete with the DSM2 2.4GHz technology that offers freedom from frequency restrictions and allows the Blade mSR to be flown anywhere, anytime indoors with precise 4-channel control. Its single-cell Li-Po battery delivers flight times of 5–7 minutes, while its ultra-micro size, weight and full functioning single rotor design provides the agility needed for flying in the smallest of spaces.

For pilots that already own a DSM2 transmitter and purchase the BNF (bind and fly) version, all they need to do is bind their DSM2 transmitter or module to the Blade mSR receiver and that’s it, other than charging the batteries they are ready to fly!

Celectra 4-Port 1-Cell Li-Po Charger
4 independently functioning charging circuits to reliably charge your single cell
Li-Po battery. A/C D/C 6V Power supply compatible. Portable by use of 4 D size batteries.

Unique rotor head
Designed specifically to provide inherent stability of a coaxial helicopter, but provide
the agile control of a single rotor helicopter.

Factory installed 5-in-1 control unit
With Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos. No
installation or difficult electronics setup is required. The receiver is compatible with all Spektrum DSM2 equipped
aircraft transmitters and modules.

Ultra-micro weight
Tipping the scales at less than one ounce (28 grams) ready-to-fly, the
Blade mSR is one of the world's lightest, single rotor, fixed pitch,
Bell-Hiller, full-function designs.

Ultra-micro size
With a rotor span of less than 7 inches, the Blade mSR is small enough to fly
indoors just about anywhere, anytime.

1S 3.7V 120mAh Li-Po battery
Low-weight, high-power and offers durations of 5-7 minutes per charge.

Micro coreless main motor
Powerful and efficient main motor for great performance and flight times per charge.

Alternative Livery
A Red Sunset canopy and vertical fin set is also available.

Adjustable precision Swashplate
The Blade mSR comes with an adjustable precision swashplate.
Advanced pilots may benefit from a more aggressive setup.

In the Box


	More Power Extra capacity keeps you in the air longer. The mSR comes complete with two 120mAh single cell Li-Po flight battery packs. Nine percent more capacity than previous micro packs and over double the power in total supplied with mCX’s.	Charger and Power Supply The Celectra 4-Port single cell charger can charge up to 4 single cells at a time and has the versatility of itself being powered internally by four D size batteries or by the included mains 6 volt 1.5 amp power supply.	Batteries and Spares Batteries for the transmitter are included as well as a spare tail rotor, flybar, body grommets, screwdriver and a handy precision swashplate calibration tool. This tool is used when rebuilding to ensure rotor head and swashplate linkages are correctly spaced.