Impulse 3S1P 950mAh 25C Li-Po

With such a bewildering array of Li-Po batteries on the market now, how do you choose the best?
The answer is simple, the new 'Impulse' range has to be that choice. We tested many, many cells
before deciding that the 'Impulse' range offered the right combination of performance, safety,
quality and price. So many Li-Po battery manufacturers claim high 'C' discharge rates and then fail to
deliver in practical use. You can be confident that the constant 'C' rating on the Impulse label is a
true figure and you're going to get the performance that you need and expect.
Performance is not the only story, the Impulse cells are constructed in a way that is much more resistant to 'run away' failures so
characteristic of lesser cells of this type (Li-Po). The Impulse cells
use a little more raw material to achieve this, at no dramatic penalty
in terms of weight or size. There are smaller and lighter cells out
there, but none offer this unique combination of factors that make
them ideally suited to our model requirements.
Just look at the pack construction method – The Impulse packs are
all assembled using PCB boards to prevent unwanted 'shorting' that
can occur in packs that just use tape. The security of the
connections so close to where the tabs exit each cell ensures that
flexing does not occur, which could result in the tab breaking. The
ends of the pack are then protected using a small foam pad before
a tough heatshrink sleeve is applied. Power cables are selected to
suit the rated output and securely soldered to the PCB. The cables
are then taped to the pack along its length to prevent flexing at the
joint. The balance plug is common to all Impulse packs and is
suited to most of the balance chargers currently in the market. It
too is securely soldered to the PCB.
Choose the best, choose 'Impulse'.