Multiplex Xeno Radio Controlled Flying Wing - 214239

The flying wing for ultimate slope and electric flying fun

At many slopes and flat-field flying sites you will find dozens of flying wings. These models are usually cut from various grades of foam and stiffened with parcel tape. The Xeno is a superior version: more elegant, of higher technical quality, and offering loads of convenience as well as excellent flying fun.
When designing the Xeno we made good creative use of the possibilities of 3-D CAD / CAM techniques and modern foam moulding technology. The result is an interesting shape with an unmistakable appearance.
For ease of transport the Xeno can simply be folded together in a few seconds, and in this state it can be carried safely and conveniently in a rucksack or similar.
Rigging the model for launch also takes just a few seconds, and converting it to electric power and back is almost equally rapid.
With its simple construction and high level of pre-fabrication it only takes two or three hours to assemble the Xeno (i.e. one evening - it really doesn’t count as construction!)
The plus points:
• Requires just a simple radio control system with delta mixer
• Numerous high-quality injection-moulded plastic parts provide interesting detail solutions
• Strong and rigid without the need for “taping” - thanks to ELAPOR® construction
• Removable / replaceable fins
• The finished model can be folded together, making it very easy to transport
• Good-natured flying characteristics, simple to fly (great for beginners), stall-proof
• Broad speed range - a genuine fun-flyer!
• Optional electric power set: fitted in seconds.
• Optional transport bag with strap attachment (# 76 3317)

Kit contents:
Moulded ELAPOR® and plastic
parts, small items, decal sheet,
instructions

Replacement parts
Wing panels # 22 4106
Fins (pair) # 22 4107
Motor fairing # 22 4108
Canopy for powered version # 22 4109
Small items / plastic parts, glider # 22 4110
Small items / plastic parts, electric # 22 4111
Glider canopy # 22 4112
Decal sheet # 72 4559
Recommended equipment:
2 x Tiny MG servos # 6 5122
1 x RX 6-SYNTH light receiver 35 MHz # 5 5876
40 MHz # 5 5877
or
1 x RX 5 receiver 35 MHz # 5 5923
40 MHz # 5 5924
Electric version as above, plus:
Xeno power set # 33 2654
or
Xeno Tuning power set # 33 2655
(No receiver battery required)
1 x Li-Batt BX 3/1- 950 flight battery # 15 7118

Specification:
Wingspan: 1245 mm
All-up weight, glider / electric approx.: 395 g / 460 g
Total surface area: 32 dm²
Wing loading: 12.5 to 14.5 g/dm²
RC functions: Elevator, aileron (delta mixer), optional throttle