Parkzone Radian Pro PNP - PKZ5475

Designed with experienced sailplane pilots in mind, the Parkzone Radian™ Pro comes out of the box with ailerons and functioning flaps that allow pilots to take advantage of sailplane mixing functions like reflex, camber and crow. It’s not however essential to have a programmable system to fly it. Any 5-channel sport radio can provide basic four-channel control with flaps using the included Y-harness. Like the original Radian, the Radian Pro also comes equipped with a powerful 480-size 960Kv brushless motor system that can catapult it to altitude in seconds.

Its airframe is constructed from the same tough Z-Foam™ material and has been reinforced with fibreglass blades in the fuselage and wing to reduce flex. This reinforcement, along with that of the carbon fibre rod in the wing, make it possible to achieve a level of soaring precision with the Radian Pro that’s on par with many competition gliders.

The Parkzone Radian Pro PNP Glider is a saving over the BNF version can be made for those with existing batteries and chargers as the plug-N-play versions comes as plane only. Everything is installed and connected ready to go in the plane, all that’s needed is to fit and connect up a receiver of choice.

Parkzone Radian Pro PNP Features

Ready to fly in minutes
5-channel control – throttle, aileron, elevator, rudder and flaps
Powerful 480-size 960Kv brushless outrunner motor installed
E-flite™ Pro 30A brushless ESC installed
Durable, lightweight and repairable Z-Foam™ construction
Requires a 5-channel full range transmitter, receiver, battery and charger (sold separately)

Parkzone Radian Pro PNP Tech Spec:

Wingspan	2000mm (78.5 in)
Length	1140mm (45.0 in)
Weight	980 g (34.6 oz)
Speed control	E-Flite PRO 30A ESC (installed)
Motor	480 BL 960 KV Outrunner (installed)
Servo	PKZ SV 80 sport servos (6 installed)
Receiver	AR600 DSM2 (installed in BNF)