Image Gallery (Click to View):

Product Information

ST Model Cessna 350 ARTF

A model based on one of the prettiest modern light aircraft in the world today. The ST Model Cessna 350 combines graceful elegance with spritely performance and forgiving manners. Those complex, curvy lines are accurately moulded in the tried and tested ST Model EPO moulding technique to give a ’ding’ resistant finish combined with a smooth surface that readily accepts the stunning decal colours.

When you add in the amazing ’Fowler’ type flaps and lights set, the Cessna 350 becomes an irresistable package that appeals to all levels of pilot skill beyond the basic trainer. Power comes courtesy of a 1320kv brushless, outrunner motor and an 30A ESC which are factory installed and ready to be hooked up to a 1600/1800mAh 3 cell Li-Po of your choice.

The tinted canopy, wheel spats and fully sprung noseleg are the finishing touches that ST Model have become famous for.

The four 9G servos are also supplied and fitted and merely need to be connected to your receiver. As the model requires no glue, just one screwdriver will have her ready to fly in 15 minutes. OK, adding the decals may take a little longer, but you might not want to wait!!

Specification

• Wingspan: 1435mm (56.5in)
• Length: 970mm (38.2in)
• Weight: 980g (34.57oz)
• Servos: 4 x 9g (Included)
• Radio System: 5 Channel
• Required Electric Motor: Brushless Outrunner 1320kv(Inc)
• Speed Controller: 30A (Included)
• LiPo Recommended: 3S Intellect 1600/2100mAh 20C required
• Wing Loading: 44g/dm2
• Wing Area: 22.3dm2 (346sq.in)

Be the first to review this product!

Price: £139.99 £119.99

• Ask a question about this product
• Write review / comment

In Stock