Image Gallery (Click to View):

Product Information

ST Model Fox EP ARTF 2.4GHz

Some aircraft create an image around them that defines exactly what they are about. The ST Model Fox does exactly that and shouts ’aerobatics’ from every angle. It is no surprise to know that the full size is one of the most aerobatic gliders in the world and this ST Model version is proud to bring that capability to you. Like all ST Model aircraft, the Fox is moulded in tough EPO foam and finished to a very high standard. From opening the box to having the model ready to fly can take as little as 15 minutes and probably even less.

Supplied with a 4 channel 2.4gHz AFHSS radio system. With just a 3 cell 1000/1300mAh Li-po battery, she will climb strongly and be ready for a full schedule of aerobatics in no time. She is not that heavy so keep the speed up to get that crisp control response. Throttle back and fold the propeller for true glider performance. If you like EP performance, why not try the glider version and have a go at aerotowing?

The longest job is applying the decals! Just a couple of screws see the wings attached onto the carbon main spar, and as the servos and hinging is all done at the factory, that’s it. One screw has the tailplane attached in a few seconds and then it is down to applying the decals. The powerful brushless, outrunner motor and ESC are pre-installed as is the 10 x 6 folding propeller. Even the ESC power wires have a ’Deans’ type connector fitted.

Specification

• Wingspan: 1800mm (70.9in)
• Length: 880mm (34.65in)
• Weight: 685g (24.12ozs)
• Servos: 4 x 9g (Included)
• Radio System: ST 2.4GHz Tx & Rx (Included)
• Electric Motor: Brushless outrunner (Included)
• LiPo: Intellect 3 cell 1100mAh 20C Required
• S/C Rec: Brushless 18A (Included)
• Wing Loading: 29.7g/dm2
• Wing Area: 23dm2

Be the first to review this product!

Price: £159.99 £144.97

• Ask a question about this product
• Write review / comment

In Stock - Warehouse